Visco 2000 20W/50 is a premium and high performance engine oil, formulated using high quality mineral based oils of high viscosity index and a shear stable viscosity index improver to give it the ‘stay-in-grade’ multi-viscosity characteristic. This ensures that maximum engine protection is provided in the lubrication process. It is primarily formulated for petrol engines where long drain intervals are considered. It could also be used for diesel engines.

Super Visco Static 20W/50 is a high performance engine oil, formulated using high quality mineral based oils of high viscosity index and a shear stable viscosity index improver to give it the ‘stay-in-grade’ multi-viscosity characteristic. This ensures that maximum engine protection is provided in the lubrication process. It is primarily formulated for petrol engines where medium drain intervals are considered. It could also be used for diesel engines

Heavy Duty 40 is an engine oil that is formulated for a mixed fleet application using high quality mineral base oils and additives to provide the high levels of engine protection under severe operational conditions. It is primarily formulated for petrol engines and could also be used for diesel engines. In both cases, long drain intervals are not serious considerations.

Diesel Motor Oil 40 is a high quality engine oil that is formulated for a mixed fleet application using high quality mineral base oils and advanced chemical additives system to provide the high levels of engine protection under severe operational conditions. It is primarily formulated for diesel engines and could also be used for petrol engines. In both cases, a minimum of a medium drain intervals are expected.

Generator Oil SAE 40 Diesel Motor Oil 40 is a high quality engine oil that is formulated for a mixed fleet application using high quality mineral base oils and advanced chemical additives system to provide the high levels of engine protection under severe operational conditions. It is primarily formulated for diesel engines and could also be used for petrol engines. In both cases, a minimum of a medium drain intervals are expected.

Motorcycle Oil is a two – stroke engine oil that is blended from a high-quality mineral base oils and additives to provide the high levels of engine cleanliness and less soot, under severe operational conditions. It is primarily formulated for two stroke petrol engines.

Four-Stroke Motorcycle Oil is an engine oil formulated to meet the extreme requirements of a four-stoke motorcycle through the protection of the wet clutch systems at higher revolutions per minute and temperature while ensuring that the life of the engine is extended. In addition, through the lubrication of the pistons, the engine oil cools the motorcycle engine and protects it from experiencing breakdown due to heat accumulation.

Vanellus C3 Extra 15W/40 is a premium and high-performance multigrade lubricant for the primary purpose of modern-day Diesel, turbocharged or normal engines, where maximum protection of the engine is required. It could also be used for Gasoline engines as a secondary option. It adapts to the most arduous service conditions in all passenger vehicles.

Vanellus C3 15W/40 CH4/SJ is a multigrade and versatile engine oil designed for use in mixed fleets where premium performance, maximum protection of the diesel engine is required. It is formulated from highly refined base oils and a multifunctional additive package, which offers the latest technology in terms of detergent, dispersant, anti -wear, anti-oxidation and corrosion inhibition performance.

Vanellus F C3 15W/40 CF4/SF is a very high-performance multigrade lubricant for modern Diesel and Gasoline engines, turbocharged or normal aspirated engines. It adapts to the most arduous service conditions in all passenger vehicles.

Vanellus C3 Monograde oils are available as SAE 10W, 30, 40 and 50 grades and are a premium quality versatile diesel engine oil designed for mixed fleet applications (except 10W). They are formulated using high quality base oils and an advanced chemical additive system to provide very high levels of engine protection under severe operational conditions.

Gear Oil 90EP is a specially designed manual gear lubricant and formulated from high quality mineral base oils and extreme pressure, anti-foam, anti-corrosion and anti-oxidation additives. It is used in automotive gear systems where a spiral-bevel gears in automotive systems, operate under moderate speeds and loads.

Gear Oil 140EP is a specially designed manual gear lubricant and formulated from high quality mineral base oils and extreme pressure, anti-foam, anti-corrosion and anti-oxidation additives. It is used in automotive gear systems where a hypoid gears in automotive axles, operate under moderate speeds and loads.

A premium and high performance oil, specially formulated multigrade gear lubricant from mineral based oils, containing extreme pressure, anti-foam, anti-corrosion and anti-oxidation additives

This is a range of mineral-base hydraulic oils conforming to the international classification ISO Type HM (oils inhibited against rust and oxidation, and containing anti-wear additives) and blended to fall within the ISO viscosity grades.

AP Brake Fluid is an excellent lubricant for all moving parts in master and slave cylinders and has been specifically formulated to protect all seal materials and so prevent possibility of leakage or ingress of contaminants.

Radiator Coolant is formulated from a mono ethylene glycol based and a high quality of antifreeze for high performance of the cooling systems of engine radiators. It prevents freezing in cold seasons and boiling in hot seasons due to its special formulation.

Heavy Duty Radiator Coolant is an ethylene glycol that uses organic antifreeze technology and is premixed with water in the ratio 50/50. It is a crucial fluid that facilitates the cooling system of an on-road automobile or heavy-duty tuck or an off-road equipment. The cooling system consists of the radiator, which usually has a pressurized cap, an overflow bottle, a thermostat and a cooling fan. The purpose of the cooling system is to circulate coolant through the engine thereby cooling the engine and the surrounding parts in the process.

A range of high-quality engine oils, which are for marine and industrial use, provides excellent standards of engine cleanliness in arduous service conditions. The oil possesses a high level of alkalinity; this together with a degree of dispersancy that permits effective centrifugal and static filtration which ensures long service life for these oils.

This is a high quality, multi-purpose marine crankcase oils of medium dispersancy and high alkalinity containing a corrosion inhibitor and load carrying additives. They are available in SAE 30 and SAE 40.

Energol IC-HF is a premium grade trunk piston engine lubricant especially formulated to meet special application needs. They are available in SAE 30 and SAE 40.

Two Stroke Marine Engine Oil is an engine oil formulated for outboard engine oils and also suitable for other applications where a two-stroke marine engine oil is recommended. It enhances engine performance and reduced environmental degradation.

Energol OE-M 30 is purposely designed as a “multi-functional crankcase fluid”, which has been developed for use in all types of low-speed crosshead diesel engines.

It is a cylinder marine engine oil with very high alkalinity, thus minimizing the corrosive wear of piston rings and cylinder liners in engines burning residual fuels of high sulphur content. The Energol CLO 50-M keeps deposit formation in ring grooves to a minimum and gives exceptional piston cleanliness.

Energol IC-RG 40 is a zinc-free railroad engine diesel oil, formulated from solvent refined base oils, together with additives for extended service in large engines and providing the necessary load carrying qualities and corrosion protection for silver-plated components that would suffer corrosion attack from oils containing zinc additives.

Gas Engine Oil provides outstanding performance in engines that use gaseous fuels. This oil has proven ability to optimize the life of all engine components while achieving extended oil change intervals. It has been tested and proven superior in severe applications worldwide. They are available in SAE 30 and SAE 40.

Transmission Fluid Dexron II is specially designed for automatic gear system where a Dexron II is recommended. It is formulated from high quality mineral base oils with advanced additives to facilitate corrosion and rust protection, smooth valve operation and effective gear lubrication. It also serves as a transmission fluid in some power steering systems

Transmission Fluid Dexron III is a high performance automatic transmission fluid and specially designed for automatic gear system where a Dexron III is recommended. It is formulated from high quality mineral base oils with advanced additives to facilitate corrosion and rust protection, smooth valve operation and effective gear lubrication. It also serves as a transmission fluid in some power steering systems

A range of high quality, lead free EP oils having excellent thermal stability and high load carrying capacity. The formulation provides excellent corrosion protection, anti-foam characteristics, demulsibility and oxidation resistance. These oils offer improved operator safety due to absence of lead-based additives and presence of Sulphur phosphorus additives. They are available in ISO 68, 100, 150, 220, 320 and 460.

A range of high quality, solvent refined, non-additive oils, that possess inherently high resistance to oxidation and emulsification. Offers long service life with minimum deterioration of properties during use. The high viscosity index (HVI) they possess, ensures small changes of viscosity with change of temperature and ideally suited for a great variety of lubrication applications over a wide temperature range. They are available in ISO 32, 46, 68, 100, 150, 220, 320 and 460.

Transcal N is a low-viscosity oil for use in modern heat transfer systems where its ability to flow rapidly at low temperatures ensures quick circulation at start-up and less risk of local overheating. It is suitable for heat transfer systems working in a temperature range of –10OC to 3160C (14°F – 600°F

TBO are range of high-quality base oil blends specially selected and formulated for the exacting lubricating demands of steam turbines. They have great resistance to the deterioration influences of turbine service and do not foam in use. Their demulsification characteristics are maintained over long periods of service hence minimizing sludge formation. They are available in ISO 32, 46, 68, 100.

These are high-quality lithium-based greases blended with solvent-refined oils, and suitable for operating temperatures between -30oC and 120oC. They are resistant to water and high-pressure steam and combine the smooth texture of calcium grease with a drop point higher than that of sodium greases. The LS grades are multi-purpose greases containing oxidation- and corrosion-inhibitors. Energrease LS incorporates EP additives that gives it excellent load carrying capacity.

Energrease HT2 is a high-performance non-melting grease, specifically designed for lubrication of equipment operating at high temperature. It is based on a stable inorganic thickener, refined mineral oils, and tailored high performance additives. It has good oxidation stability.

Energrease HT2 is a high-performance lithium complex grease, specifically formulated for lubrication of equipment operating at high temperature. It is based on a stable inorganic thickner, refined mineral oils, and tailored high performance additives. It has good oxidation stability.

Energrease MOS2 is a Lithium saponified lubricating grease containing oxidation and corrosion inhibitors. Additional extreme pressure properties are achieved by the use of molybdenum disulphide, while heavy metals are eliminated from the additive package. The highly refined base oil blend contains less than 3% pca’s. It has a very low internal friction coefficient.

Energrease Marine 2 (Calcium Complex Based) is a high-performance calcium sulphonate based mineral grease, formulated for lubrication of bearings of equipment operating in marine environments, wire ropes and open gears due to its high resistance of water wash off and other elements of nature.

Energol CM1 is a demoulding oil formulated for mould release as used in an autoclaved aerated concrete block. Energol CM 1 is an oil with an emulsifier combination intended for diluting with water on site. The result of mixing is a creamy water-in-oil emulsion-one in which oil is the continuous or external phase, and the water is present as fine droplets.